Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2010 >> Murano LE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Audio System, Visual System, Navigation System) >> BOSE Audio Without Navigation >> Function Diagnosis >> Audio System >> Component Description

Component Description

WARNING: This page is about a different car, the 2009 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
COMPONENT DESCRIPTION

Part name Description
AV CONTROL UNIT
  • The AM/FM receiving function and the CD playing function are equipped.
  • BOSE amp. ON signal and sound signal are transmitted to BOSE amp.
FRONT DISPLAY UNIT
  • Front display image is controlled by the serial communication from AV control unit.
  • RGB image signal (audio operation condition) is input from AV control unit.
BOSE AMP.
  • Inputs power (amp. ON) and sound signal from AV control unit, and outputs sound signal to woofer and each speaker.
  • Woofer amp. ON signal is transmitted to woofer.
WOOFER
  • Composed of two woofers and a woofer amp.
  • Inputs power (amp. ON) and sound signal from BOSE amp.
  • Outputs low frequency sound.
FRONT DOOR SPEAKER
  • Outputs sound signal from BOSE amp.
  • Outputs sound (mid and low range).
REAR DOOR SPEAKER
  • Outputs sound signal from BOSE amp.
  • Outputs sound (mid and low range).
FRONT SQUAWKER
  • Outputs sound signal from BOSE amp.
  • Outputs sound (high and mid range).
REAR SPEAKER
  • Outputs sound signal from BOSE amp.
  • Outputs sound (high and mid range).
CENTER SPEAKER
  • Outputs sound signal from BOSE amp.
  • Outputs sound (high and mid range).
MULTIFUNCTION SWITCH
  • Operation panel is equipped with the centralized switch where audio and auxiliary input operations are integrated.
  • The multifunction switch is connected to the preset switch by wiring harness, and it transmits the operation signal to the preset switch.
PRESET SWITCH
  • Operation panel is equipped with the centralized switch where audio and air conditioner operations are integrated.
  • The preset switch is connected via AV communication, and it transmits the operation signals of the preset switch and multifunction switch.
  • The disk ejection operating signal is performed by wiring harness.
STEERING SWITCH
  • Operations such as audio and hands-free phone are possible.
  • Steering switch signal (operation signal) is output to AV control unit.
ANTENNA BASE A radio antenna base integrated with radio antenna amp. and satellite radio antenna is adopted.
ANTENNA AMP.
  • Radio signal received by rod antenna is amplified and transmitted to AV control unit.
  • Power (antenna amp ON signal) is supplied from AV control unit. SATELLITE RADIO ANTENNA
  • Receives the satellite radio wave and outputs it to the satellite radio tuner.
SATELLITE RADIO TUNER
  • Inputs the satellite radio signal from satellite radio antenna and outputs the sound signal to the AV control unit.
  • It is controlled with the AV control unit and serial communication (communication signal and request signal).
iPod ADAPTER
  • Inputs iPod sound signal from iPod®, and outputs iPod sound signal to AV control unit.
  • Receiving/transmitting of iPod© operation signals are performed as follows:
  • between AV control unit and iPod adapter: AV communication.
  • between iPod® and iPod adapter: serial communication.