Physical Values
WARNING: This page is about a different car, the 2009 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
TERMINALS REFERENCE
| Terminal (Wire color) | Description | Condition | Reference value (Approx.) | |||
|---|---|---|---|---|---|---|
| + | - | Signal name | Input/Output | |||
| 6 (BR) | 15 (L) | Steering switch signal A | Input | Ignition switch ON | Keep pressing SOURCE switch. | 0 V |
| Keep pressing SEEK (up) switch. | 0.7 V | |||||
| Keep pressing SEEK (down) switch. | 1.3 V | |||||
| Keep pressing TALK/PHONE SEND switch. | 2.0 V | |||||
| Except for above. | 3.3 V | |||||
| 7 (R) | Ground | ACC power supply | Input | Ignition switch ACC | - | Battery voltage |
| 9 (R) | Ground | Illumination signal | Input | OFF | Lighting switch is OFF. | 0 V |
| Lighting switch is ON. | 12.0 V | |||||
| 15 (L) | Ground | Steering switch signal GND | - | Ignition switch ON | - | 0 V |
| 16 (G) | 15 (L) | Steering switch signal B | Input | Ignition switch ON | Keep pressing VOL DOWN switch. | 0 V |
| Keep pressing VOL UP switch. | 0.7 V | |||||
| Keep pressing PHONE switch. | 1.3 V | |||||
| Except for above. | 3.3 V | |||||
| 19 (Y) | Ground | Battery power supply | Input | Ignition switch OFF | - | Battery voltage |
| 20 (B) | Ground | Ground | - | Ignition switch ON | - | 0 V |
| 22 (G) | 21 (B) | Satellite radio sound signal LH | Input | Ignition switch ON | When satellite radio mode is selected. | |
| 24 (W) | 23 (R) | Satellite radio sound signal RH | Input | Ignition switch ON | When satellite radio mode is selected. | |
| 25 | - | Shield | - | - | - | - |
| 26 | - | Shield | - | - | - | - |
| 28 (R) | Ground | Request signal (SAT→CONT) | Input | Ignition switch ON | When satellite radio mode is selected. | |
| 29 (W) | Ground | Communication signal (SAT→CONT) | Input | Ignition switch ON | When satellite radio mode is selected. | |
| 30 (B) | Ground | Communication signal (CONT→SAT) | Output | Ignition switch ON | When satellite radio mode is selected. | |
| 33 | - | FM sub | Input | - | - | - |
| 34 | - | AM-FM main | Input | - | - | - |
| 35 | Ground | Antenna amp. ON signal | Output | Ignition switch ACC | - | 12.0 V |
| 36 (L) | 37 (P) | Without DVD player models
|
Output | Ignition switch ON | When composite image is displayed. | |
With DVD player models
|
||||||
| 37 (P) | Ground | Composite image ground | - | Ignition switch ON | - | 0 V |
| 38 (Y) | Ground | RGB image signal (B: blue) | Output | Ignition switch ON | Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen. | |
| 39 (L) | Ground | RGB image signal (G: green) | Output | Ignition switch ON | Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen. | |
| 40 (G) | Ground | RGB image signal (R: red) | Output | Ignition switch ON | Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen. | |
| 41 (B) | Ground | RGB synchronizing signal | Output | Ignition switch ON | - | |
| 42 | - | Shield | - | - | - | - |
| 43 (W) | Ground | RGB area (YS) signal | Output | Ignition switch ON | When RGB image is displayed. | 5.0 V |
| When AUX or camera image is displayed. | ||||||
| 44 (G) | Ground | Communication signal (DISP→CONT) | Input | Ignition switch ON | When adjusting display brightness. | |
| 45 (G) | Ground | Horizontal synchronizing (HP) signal | Input | Ignition switch ON | - | |
| 46 (LG) | Ground | Signal GND | - | Ignition switch ON | - | 0 V |
| 47 (O) | Ground | Signal VCC (front display unit power supply) | Output | Ignition switch ACC | - | 9.0 V |
| 49 | - | Shield | - | - | - | - |
| 50 | - | Shield | - | - | - | - |
| 55 | - | Shield | - | - | - | - |
| 56 (R) | Ground | Communication signal (CONT→DISP) | Output | Ignition switch ON | When adjusting display brightness. | |
| 57 (R) | Ground | Vertical synchronizing (VP) signal | Input | Ignition switch ON | - | |
| 58 (BR) | Ground | Inverter GND | - | Ignition switch ON | - | 0 V |
| 59 (Y) | Ground | Inverter VCC (front display unit power supply) | Output | Ignition switch ACC | - | 9.0 V |
| 64 | Ground | Shield (camera image ground) | - | Ignition switch ON | - | 0 V |
| 65 (W) | 64 | Camera image signal | Input | Ignition switch ON | when rear view camera image is displayed. | |
| 66 (Y)(1) (L)(1) | 74 (B)(1) (R)(2) | Without DVD player models
|
Input | Ignition switch ON | When AUX image is displayed. | |
With DVD player models
|
When DVD or AUX image is displayed. | |||||
| 68 (P) | Ground | Camera-connection recognition signal | Input | Ignition switch ON | Connected to camera control unit connector. | 0 V |
| Not connected to camera control unit connector. | 5.0 V | |||||
| 73 | - | Shield | - | - | - | - |
| 74 (B)(1) (R)(2) | Ground | Without DVD player models
|
- | Ignition switch ON | - | 0 V |
With DVD player models
|
||||||
| 80 (R) | 79 (L) | TEL voice signal | Input | Ignition switch ON | During voice guide output with the PHONE switch pressed. | |
| 81 | - | Shield | - | - | - | - |
| 83 (R) | 82 (W) | Without DVD player models
|
Input | Ignition switch ON | When iPod mode is selected | |
With DVD player models
|
When iPod, DVD or AUX mode is selected | |||||
| 85 (B) | Ground | Ground | - | Ignition switch ON | - | 0 V |
| 86 (L) | - | CAN-H | Input/Output | - | - | - |
| 87 (P) | - | CAN-L | Input/Output | - | - | - |
| 88 (R) | - | AV communication signal (H) | Input/Output | - | - | - |
| 89 (L) | - | AV communication signal (L) | Input/Output | - | - | - |
| 90 (G) | - | AV communication signal (H) | Input/Output | - | - | - |
| 91 (L) | - | AV communication signal (L) | Input/Output | - | - | - |
| 95(3) (R) | 97(3) (W) | AUX sound signal RH | Input | Ignition switch ON | When AUX mode is selected | |
| 96(3) (B) | 97(3) (W) | AUX sound signal LH | Input | Ignition switch ON | When AUX mode is selected | |
| 97(3) (W) | Ground | AUX sound signal ground | - | Ignition switch ON | - | 0 V |
| 99 (BR)(1) (B)(2) | 98 (L)(1) (G)(2) | Without DVD player models
|
Input | Ignition switch ON | When iPod mode is selected | |
With DVD player models
|
When iPod, DVD or AUX mode is selected | |||||
| 100 | - | Shield | - | - | - | - |
| 101 (V) | Ground | SW ground | - | Ignition switch ON | - | 0 V |
| 103 (W) | Ground | Eject signal | Input | - | Pressing the eject switch | 0 V |
| Except for above | 3.3 V | |||||
| 104 (G) | Ground | Ignition signal | Input | Ignition switch ON | - | Battery voltage |
| 105 (SB) | Ground | Reverse signal | Input | Ignition switch ON | The "R" position | 12.0 V |
| Other than the "R" position | 0 V | |||||
| 106 (G) | Ground | Parking brake signal | Input | Ignition switch ON | Parking brake ON | 0 V |
| Parking brake OFF | 5.0 V | |||||
| 107 (V) | Ground | Vehicle speed signal (8-pulse) | Input | Ignition switch ON | When vehicle speed is approx. 40 km/h (25 MPH) |
NOTE:
Maximum voltage may be 12 V due to specifications (connected units).
|
| 108 (V) | 114 (LG) | Sound signal rear RH | Output | Ignition switch ON | Voice output | |
| 109 (B) | 115 (W) | Sound signal front RH | Output | Ignition switch ON | Voice output | |
| 110 (P) | Ground | Amp. ON signal | Output | Ignition switch ON | - | 10.0 V |
| 111 | - | Shield | - | - | - | - |
| 112 (O) | 118 (SB) | Sound signal rear LH | Output | Ignition switch ON | Voice output | |
| 113 (G) | 119 (R) | Sound signal front LH | Output | Ignition switch ON | Voice output | |