Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2010 >> Altima Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 41 (Security Control System (Hybrid)) >> Component Diagnosis >> DTC B261A: Push-Button Ignition Switch >> DTC Logic >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • If DTC B261A is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to "DTC LOGIC ".
  • If DTC B261A is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to "DTC LOGIC ".
DTC DETECTING CONDITION CHART

DTC No. Trouble diagnosis name DTC detecting condition Possible cause
B261A PUSH-BUTTON IGNITION SWITCH BCM detects the mismatch between the following for 1 second or more
  • Push-button ignition switch status
  • Push-button ignition switch status from IPDM E/R (CAN)
  • Harness or connectors

    (Push-button ignition switch circuit is open or shorted)

  • Between BCM and push-button ignition switch
  • Between IPDM E/R and push-button ignition switch
scientia non olet · About Mike's Workshop Manuals