Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2010 >> 370Z Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Engine Control System - System Component Testing) >> Fuel Pump >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2009 Nissan 370Z. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK FUEL PUMP
    1. Turn ignition switch OFF.
    2. Disconnect "fuel level sensor unit and fuel pump" harness connector.
    3. Check resistance between "fuel level sensor unit and fuel pump" terminals as follows.
      TERMINALS RESISTANCE REFERENCE

      Terminals Resistance (Ω)
      1 and 3 0.2 - 5.0 [at 25°C (77°F)]

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace "fuel level sensor unit and fuel pump"