Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2010 >> 370Z Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Security Control System) >> Component Diagnosis >> Hood Switch >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2009 Nissan 370Z. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK FUNCTION
    1. Select "HOOD SW" in the "Data Monitor" mode using CONSULT-III.
    2. Check the hood switch signal under the following condition.
    ITEM CONDITION CHART

    Test item Condition Status
    HOOD SW Hood Open ON
    Close OFF

    Is the indication normal? 

    YES: Hood switch is normal.

    NO: Go to "DIAGNOSIS PROCEDURE ".

scientia non olet · About Mike's Workshop Manuals