CONSULT-III Reference Value in Data Monitor Mode

Specification data are reference values.

DATA MONITOR

MONITOR ITEM	CONDITION	SPECIFICATION
HO2S2 HTR (B1)	Engine speed: Below 3, 600 RPM after the following conditions are met Engine: After warming up Keeping the engine speed between 3, 500 and 4, 000 RPM for 1 minute and at idle for 1 minute under no load.	ON
Engine speed: Above 3, 600 RPM	OFF

MONITOR ITEM

CONDITION

SPECIFICATION

HO2S2 HTR (B1)

Engine: After warming up
Keeping the engine speed between 3, 500 and 4, 000 RPM for 1 minute and at idle for 1 minute under no load.

OFF