Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2009 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine Control System - DTCS U0101 To P0133 (MR20DE-CALIFORNIA)) >> DTC P0011 IVT Control >> DTC Confirmation Procedure >> Notes

DTC Confirmation Procedure: Notes

WARNING: This page is about a different variant/trim than selected.
CAUTION: Always drive at a safe speed.
NOTE:
  • If DTC P0011 is displayed with DTC P0075, first perform trouble diagnosis for DTC P0075. See DTC P0075 IVT CONTROL SOLENOID VALVE .
  • If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

TESTING CONDITION: 

Before performing the following procedure, confirm that battery voltage is between 10V and 16V at idle.