Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2009 >> Quest Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P0447 To P1168 >> DTC P0550 PSP Sensor >> On Board Diagnosis Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. If DTC Confirmation Procedure has been previously conducted, always perform the following before conducting the next step.
    1. Turn ignition switch OFF and wait at least 10 seconds.
    2. Turn ignition switch ON.
    3. Turn ignition switch OFF and wait at least 10 seconds.
  2. Turn ignition switch ON.
  3. Start engine and let it idle for at least 5 seconds.
  4. Check 1st trip DTC.
  5. If 1st trip DTC is detected, go to , "DIAGNOSIS PROCEDURE ".