Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2009 >> Murano LE >> Repair and Diagnosis >> External Pages >> Different car >> Section 595 (Security Control System (Except CROSSCABRIOLET)) >> Basic Inspection >> Inspection And Adjustment >> ECM Recommendation Function >> ECM RECOMMENDATION FUNCTION : Special Repair Requirement

ECM RECOMMENDATION FUNCTION : Special Repair Requirement

WARNING: This page is about a different car, the 2011 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM ECM RECOMMENDATION FUNCTION
    1. Install ECM.
    2. Insert the registered Intelligent Key*, and turn ignition switch ON.

      *: To perform this step, use the key that has been used before performing ECM replacement.

    3. Maintain ignition switch in the ON position for at least 5 seconds.
    4. Turn ignition switch OFF.
    5. Start engine.

      Can engine be started? 

      YES: Procedure is completed.

      NO: Initialize BCM. Refer to CONSULT-III Operation Manual NATS-IVIS/NVIS.

scientia non olet · About Mike's Workshop Manuals