DRIVER SIDE: Special Repair Requirement

1. PERFORM INITIALIZATION PROCEDURE

   Perform initialization procedure. Refer to "ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL: SPECIAL REPAIR REQUIREMENT " and "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT: SPECIAL REPAIR REQUIREMENT ".

   GO TO 2

2. CHECK ANTI-PINCH OPERATION

   Check anti-pinch operation. Refer to "ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL: SPECIAL REPAIR REQUIREMENT " and "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT: SPECIAL REPAIR REQUIREMENT ".

   End.

PASSENGER SIDE