Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2008 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Driver Information System) >> Combination Meters >> Vehicle Speed Signal Inspection >> With CVT, Without Abs

With CVT, Without Abs

WARNING: This page is about a different car, the 2007 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK COMBINATION METER INPUT SIGNAL 
    1. Start engine and select "METER/M&A" on CONSULT-III.
    2. Using "SPEED METER" on "DATA MONITOR", compare the value of "DATA MONITOR" with speedometer pointer of combination meter.

    OK or NG 

    OK: Perform TCM self-diagnosis. Refer to "SELF-DIAGNOSTIC RESULT MODE ".

    NG: Replace combination meter. Refer to "COMBINATION METER ".

scientia non olet · About Mike's Workshop Manuals