Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2008 >> Sentra SE-R >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass, Window System & Mirrors >> Power Window System >> Rear Power Window RH Circuit Inspection (Main Power Window and Door Lock/Unlock Switch Operation With Automatic Close)

Rear Power Window RH Circuit Inspection (Main Power Window and Door Lock/Unlock Switch Operation With Automatic Close)

  1. CHECK MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH OUTPUT SIGNAL 
    1. Turn ignition switch OFF.
    2. Disconnect rear power window motor RH.
    3. Turn ignition switch ON.
    4. Check voltage between rear power window motor RH connector and ground.
      CONNECTOR TERMINAL VOLTAGE SPECIFICATION

      Connector Terminals Condition Voltage (V) (Approx.)
      (+) (-)
      D304 1 Ground UP 0
      DOWN Battery voltage
      2 UP Battery voltage
      DOWN 0
      Fig 1: Checking Voltage Between Front Power Window Motor RH Connector And Ground
      G04927875Courtesy of NISSAN MOTOR CO., U.S.A.

    OK or NG 

    OK: Replace rear power window motor RH. Refer to REMOVAL AND INSTALLATION 

    NG: GO TO 2.

  2. CHECK REAR POWER WINDOW MOTOR RH CIRCUIT 
    1. Turn ignition switch OFF.
    2. Disconnect rear power window switch RH.
    3. Check continuity between rear power window switch RH connector (A) and rear power window motor RH connector (B).
      CONNECTOR TERMINAL CONTINUITY SPECIFICATION

      Connector Terminal Connector Terminal Continuity
      A B
      D303 6 D304 2 Yes
      7 1 Yes
    4. Check continuity between rear power window switch RH connector (A) and ground.
      CONNECTOR TERMINAL CONTINUITY SPECIFICATION

      Connector Terminal Ground Continuity
      A
      D303 6 No
      7 No
      5. Fig 2: Checking Continuity Between Rear Power Window Switch RH Connector And Ground
      G04927893Courtesy of NISSAN MOTOR CO., U.S.A.

    OK or NG 

    OK: GO TO 3.

    NG: Repair or replace harness.

  3. CHECK REAR POWER WINDOW SWITCH RH 

    Check continuity between rear power window switch RH terminals.

    CONNECTOR TERMINAL CONTINUITY SPECIFICATION

    Rear power window switch Terminals Continuity
    4 7 Yes
    5 6 Yes
    Fig 3: Checking Continuity Between Rear Power Window Switch RH Terminals
    G04205683Courtesy of NISSAN MOTOR CO., U.S.A.

    OK or NG 

    OK: GO TO 4.

    NG: Replace rear power window switch RH. Refer to REMOVAL AND INSTALLATION .

  4. CHECK GROUND SUPPLY CIRCUIT 
    1. Disconnect main power window and door lock/unlock switch.
    2. Check continuity between main power window and door lock/unlock switch connector (A) and rear power window switch RH connector (B).
      CONNECTOR TERMINAL CONTINUITY SPECIFICATION

      A B Continuity
      Connector Terminal Connector Terminal
      D5 7 D303 4 Yes
      5 5 Yes
    3. Check continuity between main power window and door lock/unlock switch connector (A) and ground.
      CONNECTOR TERMINAL CONTINUITY SPECIFICATION

      A B Continuity
      Connector Terminal Connector Terminal
      D5 7 D303 4 Yes
      5 5 Yes
      4. Fig 4: Checking Continuity Between Main Power Window And Door Lock/Unlock Switch Connector
      G00465304Courtesy of NISSAN MOTOR CO., U.S.A.

    OK or NG 

    OK: GO TO 5.

    Repair or replace harness.

  5. CHECK MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH 

    Check continuity between main power window and door lock/unlock switch terminals.

    CONNECTOR TERMINAL CONTINUITY SPECIFICATION

    Main power window and door lock/unlock switch Terminals Condition Continuity
    17 7 Lock switch UNLOCK Yes
    Lock switch LOCK No
    5 Lock switch UNLOCK Yes
    Lock switch LOCK No
    Fig 5: Checking Continuity Between Main Power Window And Door Lock/Unlock Switch Terminals
    G00465305Courtesy of NISSAN MOTOR CO., U.S.A.

    6. OK or NG 

    OK: Repair or replace harness.

    NG: Replace main power window and door lock/unlock switch. Refer to REMOVAL AND INSTALLATION .

scientia non olet · About Mike's Workshop Manuals