Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2008 >> Rogue SL, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (MEXICO) >> Component Diagnosis [For MEXICO] >> P0335 CKP Sensor (Pos) >> Diagnosis Procedure

Diagnosis Procedure

  1. CHECK GROUND CONNECTION
    1. Turn ignition switch OFF.
    2. Check ground connection E21. Refer to Ground Inspection in "CIRCUIT INSPECTION ".

    Is the inspection result normal?

    YES: GO TO 2.

    NO: Repair or replace ground connection.

  2. CHECK CRANKSHAFT POSITION (CKP) SENSOR (POS) POWER SUPPLY CIRCUIT-I
    1. Disconnect crankshaft position (CKP) sensor (POS) harness connector.
    2. Turn ignition switch ON.
    3. Check the voltage between CKP sensor (POS) harness connector and ground.
      TERMINALS VOLTAGE REFERENCE

      CKP sensor (POS) Ground Voltage
      Connector Terminal
      F20 1 Ground Approx. 5V

    Is the inspection result normal?

    YES: GO TO  8.

    NO: GO TO 3.

  3. CHECK CRANKSHAFT POSITION (CKP) SENSOR (POS) POWER SUPPLY CIRCUIT-II
    1. Turn ignition switch ON.
    2. Disconnect ECM harness connector.
    3. Check the continuity between CKP sensor (POS) harness connector and ECM harness connector.
      TERMINALS CONTINUITY REFERENCE

      CKP sensor (POS) ECM Continuity
      Connector Terminal Connector Terminal
      F20 1 F8 76 Existed

    Is the inspection result normal?

    YES: GO TO 4.

    NO: Repair open circuit.

  4. CHECK CRANKSHAFT POSITION (CKP) SENSOR (POS) POWER SUPPLY CIRCUIT-III

    Check harness for short to power and short to ground, between the following terminals.

    TERMINALS REFERENCE

    ECM Sensor
    Connector Terminal Name Connector Terminal
    F8 72 Refrigerant pressure sensor E49 3
    76 CKP sensor (POS) F20 1
    E16 87 APP sensor E110 5

    Is the inspection result normal?

    YES: GO TO 5.

    NO: Repair short to ground or short to power in harness or connectors.

  5. CHECK REFRIGERANT PRESSURE SENSOR

    Refer to "DIAGNOSIS PROCEDURE ".

    Is the inspection result normal?

    YES: GO TO 6.

    NO: Replace malfunctioning components.

  6. CHECK APP SENSOR

    Refer to "COMPONENT INSPECTION ".

    Is the inspection result normal?

    YES: GO TO  12.

    NO: GO TO 7.

  7. REPLACE ACCELERATOR PEDAL ASSEMBLY
    1. Replace accelerator pedal assembly. Refer to "REMOVAL AND INSTALLATION ".
    2. Go to "SPECIAL REPAIR REQUIREMENT ".

      INSPECTION END

  8. CHECK CKP SENSOR (POS) GROUND CIRCUIT FOR OPEN AND SHORT
    1. Turn ignition switch OFF.
    2. Check the continuity between CKP sensor (POS) harness connector and ECM harness connector.
      TERMINALS CONTINUITY REFERENCE

      CKP sensor (POS) ECM Continuity
      Connector Terminal Connector Terminal
      F20 2 F8 60 Existed
    3. Also check harness for short to ground and short to power.

    Is the inspection result normal?

    YES: GO TO 9.

    NO: Repair open circuit or short to ground or short to power in harness or connectors.

  9. CHECK CKP SENSOR (POS) INPUT SIGNAL CIRCUIT FOR OPEN AND SHORT
    1. Disconnect ECM harness connector.
    2. Check the continuity between CKP sensor (POS) harness connector and ECM harness connector.
      TERMINALS CONTINUITY REFERENCE

      CKP sensor (POS) ECM Continuity
      Connector Terminal Connector Terminal
      F20 3 F8 65 Existed
    3. Also check harness for short to ground and short to power.

    Is the inspection result normal?

    YES: GO TO 10.

    NO: Repair open circuit or short to ground or short to power in harness or connectors.

  10. CHECK CRANKSHAFT POSITION SENSOR (POS)

    Refer to "COMPONENT INSPECTION ".

    Is the inspection result normal?

    YES: GO TO 11.

    NO: Replace crankshaft position sensor (POS).

  11. CHECK GEAR TOOTH

    Visually check for chipping signal plate gear tooth.

    Is the inspection result normal?

    YES: GO TO 12.

    NO: Replace the signal plate.

  12. CHECK INTERMITTENT INCIDENT

    Refer to "INTERMITTENT INCIDENT ".

    INSPECTION END

scientia non olet · About Mike's Workshop Manuals