Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2008 >> Maxima SL >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - DTCS P0137 To P0447 >> DTC P0137, P0157 Ho2S2 >> On Board Diagnosis Logic

On Board Diagnosis Logic

The heated oxygen sensor 2 has a much longer switching time between rich and lean than the heated oxygen sensor 1. The oxygen storage capacity of the three way catalyst (manifold) causes the longer switching time. To judge the malfunctions of heated oxygen sensor 2, ECM monitors whether the maximum voltage of the sensor is sufficiently high during the various driving condition such as fuel-cut.

Fig 1: Heated Oxygen Sensor Voltage Signals Graph
G04905346Courtesy of NISSAN MOTOR CO., U.S.A.
DTC DETECTING CONDITION AND POSSIBLE CAUSE

DTC No. Trouble diagnosis name DTC detecting condition Possible cause
P0137
0137
(Bank 1)
Heated oxygen sensor 2 circuit low voltage The maximum voltage from the sensor is not reached to the specified voltage.
  • Harness or connectors

    (The sensor circuit is open or shorted)

  • Heated oxygen sensor 2
  • Fuel pressure
  • Fuel injector
  • Intake air leaks
P0157
0157
(Bank 2)