Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2008 >> Frontier XE >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (Qr25DE) >> Component Diagnosis >> P2100, P2103 Throttle Control Motor Relay >> DTC Confirmation Procedure >> Procedure For DTC P2103

Procedure For DTC P2103

TESTING CONDITION: 

Before performing the following procedure, confirm that battery voltage is more than 8V  .

With CONSULT-III

  1. Turn ignition switch ON and wait at least 1 second.
  2. Check DTC.
  3. If DTC is detected, go to "DIAGNOSIS PROCEDURE ".

With GST

Follow the procedure "With CONSULT-III" above.

scientia non olet · About Mike's Workshop Manuals