Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2008 >> Frontier XE >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (Qr25DE) >> Component Diagnosis >> P2100, P2103 Throttle Control Motor Relay >> DTC Confirmation Procedure >> Procedure For DTC P2100

Procedure For DTC P2100

With CONSULT-III

  1. Turn ignition switch ON and wait at least 2 seconds.
  2. Start engine and let it idle for 5 seconds.
  3. Check DTC.
  4. If DTC is detected, go to "DIAGNOSIS PROCEDURE ".

With GST

Follow the procedure "With CONSULT-III" above.

scientia non olet · About Mike's Workshop Manuals