Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2007 >> X-Trail LE >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P1148 To P2138 >> DTC P1572 ASCD Brake Switch >> Component Inspection >> ASCD Clutch Switch (For M/T Models)

ASCD Clutch Switch (For M/T Models)

  1. Turn ignition switch OFF.
  2. Disconnect ASCD clutch switch harness connector.
  3. Check continuity between ASCD clutch switch terminals 1 and 2 under the following conditions.
    CONTINUITY CHART

    Condition Continuity
    Clutch pedal: Fully released. Should exist.
    Clutch pedal: Slightly depressed. Should not exist.
    Fig 1: Checking Continuity Between ASCD Clutch Switch Terminals 1 And 2
    G06152893Courtesy of NISSAN MOTOR CO., U.S.A.

    If NG, adjust ASCD clutch switch installation, refer to "CLUTCH PEDAL ", and perform step  3 again.

scientia non olet · About Mike's Workshop Manuals