Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2007 >> Sentra SE-R >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Continuously Variable Transmission (CVT) >> DTC P0710 CVT Fluid Temperature Sensor Circuit >> DTC Confirmation Procedure >> With Consult-III

With Consult-III

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode for "TRANSMISSION" with CONSULT-III.
  3. Start engine and maintain the following conditions for at least 10 minutes (Total).

    VEHICLE SPEED: 10 km/h (6 MPH) or more 

    ENG SPEED: 450 rpm more than 

    ACC PEDAL OPEN: More than 1.0/8 

    RANGE: "D" position 

  4. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
scientia non olet · About Mike's Workshop Manuals