Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2007 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Engine Control System - Component Testing (Qr25DE)) >> VIAS >> Component Inspection >> VIAS Control Solenoid Valve >> With CONSULT-II

With CONSULT-II

WARNING: This page is about a different car, the 2006 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Reconnect harness connectors disconnected.
  2. Turn ignition switch ON.
  3. Perform "VIAS SOL VALVE" in "ACTIVE TEST" mode.
  4. Fig 1: CONSULT II Display - Active Test For Energizing VIAS Solenoid Valve
    G04148504Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Check air passage continuity and operation delay time under the following conditions.
VIAS SOL VALVE CONDITION & CONTINUITY SPECIFICATION

Condition
VIAS SOL VALVE
Air passage continuity between and Air passage continuity between and
ON Yes No
OFF No Yes

Operation takes less than 1 second.