Rear Power Window LH Circuit Check (Rear Power Window Switch LH Operation)

1. Turn ignition switch OFF.
2. Disconnect rear power window motor LH.
3. Turn ignition switch ON.
4. Check voltage between rear power window motor LH connector and ground.
   CONNECTOR TERMINAL VOLTAGE SPECIFICATION
   
   

   Connector	Terminals		Condition	Voltage (V) (Approx.)
   	(+)	(-)
   D204	1	Ground	UP	0
   			DOWN	Battery voltage
   	2		UP	Battery voltage
   			DOWN	0

   Fig 1: Checking Voltage Between Rear Power Window Motor LH Connector And Ground

   

OK or NG 

OK: Replace rear power window motor LH. Refer to "REGULATOR ASSEMBLY ".

NG: GO TO 2.

1. Turn ignition switch OFF.
2. Disconnect rear power window switch LH.
3. Check continuity between rear power window switch LH connector (A) and rear power window motor LH connector (B).
   CONNECTOR TERMINAL CONTINUITY SPECIFICATION
   
   

   Connector	Terminal	Connector	Terminal	Continuity
   A		B
   D203	6	D204	2	Yes
   	7		1	Yes

4. Check continuity between rear power window switch LH connector (A) and ground.
   CONNECTOR TERMINAL CONTINUITY SPECIFICATION
   
   

   Connector	Terminal	Ground	Continuity
   A
   D203	6		No
   	7		No

   Fig 2: Checking Continuity Between Rear Power Window Switch LH Connector And Ground

   

OK or NG 

OK: GO TO 3.

NG: Repair or replace harness.

1. Connect rear power window switch LH.
2. Turn ignition switch ON.
3. Check voltage between rear power window switch LH connector D203 terminal 8 and ground.

   8 - Ground : Battery voltage 

OK or NG 

OK: GO TO 4.

NG: GO TO  5.

Fig 3: Checking Voltage Between Rear Power Window Switch LH Connector D203 Terminal 8 And Ground

1. Turn ignition switch OFF.
2. Disconnect rear power window switch LH.
3. Check continuity between rear power window switch LH terminals.
   CONNECTOR TERMINAL CONTINUITY SPECIFICATION
   
   

   Rear power window switch LH	Terminals		Condition	Continuity
   	6	5	DOWN	No
   			NEUTRAL or UP	Yes
   		8	NEUTRAL or UP	No
   			DOWN	Yes
   	7	4	UP	No
   			NEUTRAL or DOWN	Yes
   		8	NEUTRAL or DOWN	No
   			UP	Yes

   Fig 4: Checking Continuity Between Rear Power Window Switch LH Terminals

   

OK or NG 

OK: GO TO  6.

NG: Replace rear power window switch LH. Refer to "REAR DOOR ".

1. Turn ignition switch OFF.
2. Disconnect BCM.
3. Check continuity between BCM connector (A) and rear power window switch LH connector (B).
   CONNECTOR TERMINAL CONTINUITY SPECIFICATION
   
   

   A		B		Continuity
   Connector	Terminal	Connector	Terminal
   M20	68	D203	8	Yes

4. Check continuity between BCM connector (A) and ground.
   CONNECTOR TERMINAL CONTINUITY SPECIFICATION
   
   

   A		Ground	Continuity
   Connector	Terminal
   M20	68		No

   Fig 5: Checking Continuity Between BCM And Ground

   

OK or NG 

OK: GO TO 6.

NG: Repair or replace harness.

Check continuity between rear power window switch LH connector and ground.

Fig 6: Checking Continuity Between Rear Power Window Switch LH And Ground

OK or NG 

OK: Check the condition of the harness and the connector.

NG: GO TO 7.

1. Disconnect main power window and door lock/unlock switch.
2. Check continuity between main power window and door lock/unlock switch connector (A) and rear power window switch LH connector (B).
   CONNECTOR TERMINAL CONTINUITY SPECIFICATION
   
   

   A		B		Continuity
   Connector	Terminal	Connector	Terminal
   D5	15	D203	4	Yes
   	16		5	Yes

3. Check continuity between main power window and door lock/unlock switch connector (B) and ground.
   CONNECTOR TERMINAL CONTINUITY SPECIFICATION
   
   

   A		Ground	Continuity
   Connector	Terminal
   D7	15		No
   	16		No

   Fig 7: Checking Continuity Between Main Power Window And Door Lock/Unlock Switch Connector And Ground

   

OK or NG 

OK: GO TO 8.

NG: Repair or replace harness.

Check continuity between main power window and door lock/unlock switch terminals.

Fig 8: Checking Continuity Between Main Power Window And Door Lock/Unlock Switch Terminals

OK or NG 

OK: Repair or replace harness.

NG: Replace main power window and door lock/unlock switch. Refer to "FRONT DOOR ".