Cancel Operation
WARNING: This page is about a different car, the 2006 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
When any of following conditions exist, cruise operation will be canceled.
- CANCEL switch is pressed.
- More than 2 switches at ASCD steering switch are pressed at the same time (Set speed will be cleared.).
- Brake pedal is depressed.
- Shift lever is changed to N, P, R position.
- Vehicle speed decreased to 13 km/h (8 MPH) lower than the set speed.
- VDC/TCS system is operated.
- CVT control system has a malfunction. Refer to
"DTC P1700 CVT CONTROL SYSTEM
".
When the ECM detects any of the following conditions, the ECM will cancel the cruise operation and inform the driver by blinking indicator lamp.
- Engine coolant temperature is slightly higher than the normal operating temperature, CRUISE lamp may blink slowly.
When the engine coolant temperature decreases to the normal operating temperature, CRUISE lamp will stop blinking and the cruise operation will be able to work by pressing SET/COAST switch or RESUME/ACCELERATE switch.
- Malfunction for some self-diagnoses regarding ASCD control: SET lamp will blink quickly.
If MAIN switch is turned to OFF during ASCD is activated, all of ASCD operations will be canceled and vehicle speed memory will be erased.