Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2007 >> Frontier XE, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Control System - Component Testing (VQ)) >> Ignition Signal >> Component Inspection >> Condenser-1

Component Inspection: Condenser-1

WARNING: This page is about a different variant/trim than selected.
  1. Turn ignition switch OFF.
  2. Disconnect condenser-1 harness connector.
  3. Check resistance between condenser-1 terminals 1 and 2.
    RESISTANCE SPECIFICATION CHART

    Resistance Above 1 MΩ at 25°C (77°F)
    Fig 1: Checking Resistance Between Condenser - 1 Terminals 1 And 2
    G04875488Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals