Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2007 >> Altima Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 64 (Engine Control System - Component Testing (VQ35DE)) >> Electronic Controlled Engine Mount >> Component Function Check

Component Function Check

WARNING: This page is about a different variant/trim than selected.
  1. CHECK OVERALL FUNCTION
    1. Start engine and warm it up to normal operating temperature.
    2. Shift selector lever to D range (CVT), 1st (M/T) while depressing the brake pedal and parking brake pedal.
    3. Disconnect electronic controlled engine mount control solenoid valve harness connector.
    4. Make sure that body vibration increases compared with the condition of the above step  2 (with vehicle stopped).

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: "DIAGNOSIS PROCEDURE ".

scientia non olet · About Mike's Workshop Manuals