Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2007 >> Altima Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Power Control System - ALTIMA (Hybrid)) >> Power Distribution System >> Power Supply And Ground Circuit >> Push-Button Ignition Switch Position Indicator >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2008 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK FUNCTION

    With CONSULT-III 

    1. Check push-button ignition switch ("LOCK INDICATOR", "ACC INDICATOR" and "IGNITION ON IND") in Active Test Mode with CONSULT-III.
    TEST ITEM DESCRIPTION

    Test item Description
    LOCK INDICATOR
    ACC INDICATOR
    IGNITION ON IND    		 ON Position indicator : Illuminate
    OFF : Not illuminate

    Is the inspection result normal? 

    YES : INSPECTION END.

    NO : Refer to "Diagnosis Procedure ".

scientia non olet · About Mike's Workshop Manuals