Data Monitor Mode (A/T)

DATA MONITOR MODE (A/T)

Item	Display	Monitor item		Description	Remarks
Item	Display	TCM Input signals	Main signals	Description	Remarks
Vehicle speed sensor 1 (A/T) (Revolution sensor)	VHCL/S SE A/T [km/h] or [mph]	X	-	Vehicle speed computed from signal of revolution sensor is displayed.	When racing engine in N or P with vehicle stationary, CONSULT-II data may not indicate 0 km/h (0 mph).
Vehicle speed sensor 2 (Meter)	VHCL/S SE MTR [km/h] or [mph]	X	-	Vehicle speed computed from signal of vehicle speed sensor is displayed.	Vehicle speed display may not be accurate under approx. 10 km/h (6 mph). It may not indicate 0 km/h (0 mph) when vehicle is stationary.
Throttle position sensor [accelerator pedal position (APP) sensor]	THRTL POS SEN [V]	X	-	Throttle position sensor signal voltage is displayed.
A/T fluid temperature sensor	FLUID TEMP SE [V]	X	-	A/T fluid temperature sensor signal voltage is displayed. Signal voltage lowers as fluid temperature rises.
Battery voltage	BATTERY VOLT [V]	X	-	Source voltage of TCM is displayed.
Engine speed	ENGINE SPEED [rpm]	X	X	Engine speed, computed from engine speed signal, is displayed.	Engine speed display may not be accurate under approx. 800 rpm. It may not indicate 0 rpm even when engine is not running.
Turbine revolution sensor	TURBINE REV	X	-	Checks changing speed then performs oil pressure control and torque down control.
Overdrive control switch	OVERDRIVE SW [ON/OFF]	X	-	ON/OFF state computed from signal of overdrive control SW is displayed.
PN position (PNP) switch	PN POSI SW [ON/OFF]	X	-	ON/OFF state computed from signal of PN position SW is displayed.
R position switch	R POSITION SW [ON/OFF]	X	-	ON/OFF state computed from signal of R position SW is displayed.
D position switch	D POSITION SW [ON/OFF]	X	-	ON/OFF state computed from signal of D position SW is displayed.
2 position switch	2 POSITION SW [ON/OFF]	X	-	ON/OFF status, computed from signal of 2 position SW, is displayed.
1 position switch	1 POSITION SW [ON/OFF]	X	-	ON/OFF status, computed from signal of 1 position SW, is displayed.
ASCD cruise signal	ASCD CRUISE [ON/OFF]	X	-	Status of ASCD cruise signal is displayed. ON... Cruising state OFF... Normal running state	This is displayed even when no ASCD is mounted.
ASCD OD cut signal	ASCD OD CUT [ON/OFF]	X	-	Status of ASCD OD release signal is displayed. ON... OD released OFF... OD not released	This is displayed even when no ASCD is mounted.
Kickdown switch	KICKDOWN SW [ON/OFF]	X	-	ON/OFF status, computed from signal of kick-down SW, is displayed.	This is displayed even when no kickdown switch is equipped.
Gear position	GEAR	-	X	Gear position data used for computation by TCM, is displayed.
Selector lever position	SLCT LVR POSI	-	X	Selector lever position data, used for computation by TCM, is displayed.	A specific value used for control is displayed if failsafe is activated due to error.
Vehicle speed	VEHICLE SPEED [km/h] or [mph]	-	X	Vehicle speed data, used for computation by TCM, is displayed.
Throttle position sensor [accelerator pedal position (APP) sensor]	THROTTLE POSI [/8]	-	X	Throttle position data, used for computation by TCM, is displayed.	A specific value used for control is displayed if failsafe is activated due to error.
Stop lamp switch	BRAKE SW [ON/OFF]	X	-	ON/OFF status is displayed. ON... Brake pedal is depressed. OFF... Brake pedal is released.
Line pressure duty	LINE PRES DTY [%]	-	X	Control value of line pressure solenoid valve, computed by TCM from each input signal, is displayed.
Torque converter clutch solenoid valve duty	TCC S/V DUTY [%]	-	X	Control value of torque converter clutch solenoid valve, computed by TCM from each input signal, is displayed.
Shift solenoid valve A	SHIFT S/V A [ON/OFF]	-	X	Control value of shift solenoid valve A, computed by TCM from each input signal, is displayed.	Control value of solenoid is displayed even if solenoid circuit is disconnected. The OFF signal is displayed if solenoid circuit is shorted.
Shift solenoid valve B	SHIFT S/V B [ON/OFF]	-	X	Control value of shift solenoid valve B, computed by TCM from each input signal, is displayed.
Overrun clutch solenoid valve	OVERRUN/C S/V [ON/OFF]	-	X	Control value of overrun clutch solenoid valve computed by TCM from each input signal is displayed.
Self-diagnosis display lamp (O/D OFF indicator lamp)	SELF-D DP LMP [ON/OFF]	-	X	Control status of O/D OFF indicator lamp is displayed.
X: Applicable -: Not applicable