Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2006 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Engine Control System (QG18DE)) >> Trouble Diagnosis >> Generic Scan Tool (GST) Function >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2005 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
  2. Connect GST to data link connector, which is located under LH dash panel near the fuse box cover.
    Fig 1: Locating Data Link Connector
    G02449711Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Turn ignition switch ON.
  4. Enter the program according to instruction on the screen or in the operation manual.

    (*: Regarding GST screens, sample screens are shown.)

    Fig 2: VTX Generic OBD Program Card - Scene Tool Display
    G02449712Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Perform each diagnostic service according to each service procedure.

    For further information, see the of the tool maker. 

    Fig 3: GST Scan Tool Display - OBD FUNCTIONS
    G02449713Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Mike's Workshop Manuals