ECM Inspection Table

WARNING: This page is about a different car, the 2005 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

Specification data are reference values and are measured between each terminal and ground. Pulse signal is measured by CONSULT-II.

CAUTION: Do not use ECM ground terminals when measuring input/output voltage. Doing so may result in damage to the ECM's transistor. Use a ground other than ECM terminals, such as the ground.

Fig 1: ECM Terminal Signal Reference Chart (1 Of 8)

G02450747

Courtesy of NISSAN MOTOR CO., U.S.A.

NOTE: For footnote reference explanation, see Fig 8.

Fig 2: ECM Terminal Signal Reference Chart (2 Of 8)

G02450748

Courtesy of NISSAN MOTOR CO., U.S.A.

NOTE: For footnote reference explanation, see Fig 8.

Fig 3: ECM Terminal Signal Reference Chart (3 Of 8)

G02450749

Courtesy of NISSAN MOTOR CO., U.S.A.

NOTE: For footnote reference explanation, see Fig 8.

Fig 4: ECM Terminal Signal Reference Chart (4 Of 8)

G02450750

Courtesy of NISSAN MOTOR CO., U.S.A.

NOTE: For footnote reference explanation, see Fig 8.

Fig 5: ECM Terminal Signal Reference Chart (5 Of 8)

G02450751

Courtesy of NISSAN MOTOR CO., U.S.A.

NOTE: For footnote reference explanation, see Fig 8.

Fig 6: ECM Terminal Signal Reference Chart (6 Of 8)

G02450752

Courtesy of NISSAN MOTOR CO., U.S.A.

NOTE: For footnote reference explanation, see Fig 8.

Fig 7: ECM Terminal Signal Reference Chart (7 Of 8)

G02450753

Courtesy of NISSAN MOTOR CO., U.S.A.

NOTE: For footnote reference explanation, see Fig 8.

Fig 8: ECM Terminal Signal Reference Chart (8 Of 8)

G02450754

Courtesy of NISSAN MOTOR CO., U.S.A.