Diagnostic Procedure

WARNING: This page is about a different car, the 2005 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

INSPECTION START (WITH CONSULT-II)
With CONSULT-II
1. Turn ignition switch "ON" and select "SELF DIAGNOSIS" mode for A/T with CONSULT-II.
2. Touch "ERASE".
  - GO TO 2.
CHECK DTC
Perform DIAGNOSTIC TROUBLE CODE (DTC) CONFIRMATION PROCEDURE .
- GO TO 3.
CHECK DTC AGAIN
Is the "CONTROL UNIT (RAM)" or "CONTROL UNIT (ROM)" displayed again?

Yes or No
- Yes: Replace TCM.
- No: INSPECTION END