CD Autochanger

Refer to Owner's Manual for CD autochanger operating instructions.

Power is supplied at all times:

• through 15A fuse [No. 32, located in the fuse and fusible link box]
• to CD autochanger terminal 4.

With the ignition switch in the ACC or ON position, power is supplied:

• through 10A fuse [No. 1, located in the fuse block (J/B)]
• to CD autochanger terminal 6.

Ground is supplied through the case of the CD autochanger.

Audio signals are supplied:

• through CD autochanger terminals 1,2,7 and 8
• to audio unit terminals 41, 42, 43 and 44.