Diagnostic Procedure

1. Turn ignition switch OFF.
2. Loosen and retighten three ground screws on the body.

   Refer to , "GROUND INSPECTION ".

   Fig 1: Locating M57, M61 & F14 Body Ground Screws

   Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG 

OK : GO TO 2.

NG : Repair or replace ground connections.

Refer to , "COMPONENT INSPECTION ".

OK or NG 

OK : GO TO 3.

NG : Replace mass air flow sensor (with intake air temperature sensor).

Refer to , "TROUBLE DIAGNOSIS FOR INTERMITTENT INCIDENT ".

Refer to , "WIRING DIAGRAM ".

: INSPECTION END