Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2006 >> Altima Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Engine Control System - Component Testing (VQ35DE)) >> Ignition Signal >> Component Inspection >> Condenser-2

Component Inspection: Condenser-2

WARNING: This page is about a different variant/trim than selected.
  1. Turn ignition switch OFF.
  2. Disconnect condenser-2 harness connector.
  3. Check resistance between condenser-2 terminals 1 and 2.

    Resistance : Above 1 MΩ [at 25°C (77°F)] 

    Fig 1: Checking Resistance Between Connector Terminals
    G04075318Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Mike's Workshop Manuals