Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2005 >> Sentra Base, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control System (QG18DE) >> DTC P0550: PSP Sensor >> Diagnostic Trouble Codes Confirmation Procedure

Diagnostic Trouble Codes Confirmation Procedure

NOTE: If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

WITH CONSULT-II 

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Start engine and let it idle for at least 5 seconds.
  4. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".

WITH GST 

Follow the procedure "WITH CONSULT-II" above.

scientia non olet · About Mike's Workshop Manuals