Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2005 >> Quest Base >> Repair and Diagnosis >> Engine Performance >> Engine Control System >> DTC P0605: ECM >> Diagnostic Trouble Codes Confirmation Procedure >> Procedure For Malfunction C >> With CONSULT-II

With CONSULT-II

  1. Turn ignition switch ON and select "DATA MONITOR" mode with CONSULT-II.
    Fig 1: CONSULT-II Data Monitor Display
    G02474222Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Turn ignition switch OFF and wait at least 10 seconds.
  3. Turn ignition switch ON and wait at least 1 second.
  4. Repeat step 2 to 3 for 32 times
  5. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE "
scientia non olet · About Mike's Workshop Manuals