Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2005 >> Murano SL, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1556 (Engine Control System) >> DTC P1554: Battery Current Sensor >> Overall Function Check >> With Consult-II

With Consult-II

WARNING: This page is about a different car, the 2005 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Start engine and let it idle.
  2. Select "BAT CUR SEN" in "DATA MONITOR" mode with CONSULT-II.
    Fig 1: CONSULT-II Display - Data Monitor Mode
    G02432336Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Check "BAT CUR SEN" indication for 10 seconds. "BAT CUR SEN" should be above 2, 300mV at least once. 
  4. If NG, go to DIAGNOSTIC PROCEDURE .
scientia non olet · About Mike's Workshop Manuals