Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2005 >> Armada LE, 4WD >> Repair and Diagnosis >> Engine Performance >> Engine Control System >> DTC P0335: CKP Sensor (Pos) >> DTC Confirmation Procedure >> With Consult-II

With Consult-II

  1. Turn ignition switch ON and select "DATA MONITOR" mode with CONSULT-II.
  2. Crank engine for at least 2 seconds and run it for at least 5 seconds at idle speed.
  3. If 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE 
    Fig 1: Identifying Display - Data Monitor
    G02443657Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Mike's Workshop Manuals