Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 846 (Continuously Variable Transmission (CVT)) >> Precautions >> Precautions For CVT Assembly Replacement >> Method For Erasing The EEPROM In The TCM

Method For Erasing The EEPROM In The TCM

WARNING: This page is about a different car, the 2003 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect CONSULT-II to data link connector.
  2. Turn ignition switch ON. Confirm that CONSULT-II is turned ON.
  3. Move selector lever to R position.
  4. Touch START on CONSULT-II.
  5. Select SELF-DIAG RESULTS mode for TRANSMISSION with CONSULT-II.
  6. Brake switch ON.
  7. Press the accelerator pedal (0.5/8 - 4/8 throttle) not to exceed the half, and hold it in the half or less open position. (This will set the closed throttle position signal to OFF and the wide open throttle position signal to OFF.)
  8. Touch ERASE on CONSULT-II, and then touch YES.
  9. Wait 3 seconds and then release the accelerator pedal.
  10. Turn ignition switch OFF.
scientia non olet · About Mike's Workshop Manuals