Side Curtain AIR Bag Module
WARNING: This page is about a different car, the 2002 Infiniti Q45. However, it is still accessible from the selected car via links, so may be relevant.
- Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM . Remove appropriate side curtain air bag module from vehicle. See SIDE CURTAIN AIR BAG MODULE under REMOVAL & INSTALLATION. Cut inflator from side curtain air bag. See Fig 1 . Connect Air Bag Deployment Tool (J38381) to side curtain air bag inflator using Deployment Tool Adapter (J44230). See Fig 2 .
- Place inflator in a discarded tire without a wheel. See Fig 3 . Place tire and inflator on top of another tire without a wheel. Place another tire without a wheel on top of both tires. Top tire stack with a tire and wheel assembly. Tie all tires together to keep stack upright. See Fig 4 . Position a fully charged 12-volt battery at least 16 ft. (5 m) from deployment area. Connect Red deployment tool clip to positive battery terminal and Black deployment tool clip to negative battery terminal.
- Ensure deployment tool power lamp glows Green. If deployment tool power lamp glows Red, reverse battery connections and recheck lamp. Ensure no one is within 16 ft. (5 m) of tire stack. Press deployment tool button to deploy side curtain air bag inflator.