Inspection After Installation

WARNING: This page is about a different car, the 2003 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.

After installing, confirm the following items:

When control lever assembly is shifted to each position, make sure there is no binding or disconnection in each boot.
When shifted to each position, make sure there is no noise, bending, and backlash. Especially when control lever assembly is shifted to 5th, 6th without pressing downward, check for bending.
When control lever assembly is shifted to 1st, 2nd side and 5th, 6th side, confirm control lever assembly returns to neutral position smoothly.
In any position other than reverse, confirm that control lever assembly can be pressed downward.
With control lever assembly pressed downward, confirm that it can be shifted to reverse.
When shifted from reverse to neutral position, confirm control lever assembly returns to neutral position smoothly with spring power.
Without control lever assembly pressed downward, confirm that it cannot be shifted to reverse.