Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 485 (2004 - Engine Control System - Sedan) >> Trouble Diagnosis >> DTC P0462: Fuel Level Sensor >> DTC Confirmation Procedure >> Testing Condition:

Testing Condition:

WARNING: This page is about a different car, the 2004 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.

Before performing the following procedure, confirm that battery voltage is more than 11V at ignition switch ON. 

With CONSULT-II 

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Wait at least 5 seconds.
  4. If 1st trip DTC is detected, go to Diagnostic Procedure .
Fig 1: CONSULT-II Data Monitor Display
G00732513Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Mike's Workshop Manuals