Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 432 (Automatic Transaxle - Re5F22A) >> DTC P0882 TCM Power Input Signal >> Diagnostic Procedure >> 1. Check TCM Power Source Circuit

1. Check TCM Power Source Circuit

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch "ON". (Do not start engine.)
  2. Check voltage between TCM terminals and ground.
    Fig 1: TCM Power Source Circuit Voltage Specifications
    G00777764Courtesy of NISSAN MOTOR CO., U.S.A.
    Fig 2: Checking Voltage
    G00777765Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Turn ignition switch "OFF".
  4. Check voltage between TCM terminals and ground.
Fig 3: TCM Power Source Circuit Voltage Specifications
G00777766Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG 

  1. OK: GO TO 3 .
  2. NG: GO TO 2.