Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 432 (Automatic Transaxle - Re5F22A) >> DTC P0711 Fluid Temperature Sensor Performance >> Diagnostic Procedure >> 2. Check Fluid Temperature Sensor Circuit

2. Check Fluid Temperature Sensor Circuit

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch "OFF".
  2. Disconnect the TCM connector.
  3. Check resistance between terminals 41 and 42.
    Fig 1: Fluid Temperature Sensor Temperature/Resistance Reference Table
    G00778360Courtesy of NISSAN MOTOR CO., U.S.A.
    Fig 2: Checking Resistance
    G00778361Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Disconnect the TCM connector.
  5. Check if there is continuity between the connector terminal and ground.

OK or NG 

  1. OK : GO TO 5 .
  2. NG : GO TO 3.