Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 432 (Automatic Transaxle - Re5F22A) >> DTC P0711 Fluid Temperature Sensor Performance >> Component Inspection >> A/T Fluid Temperature Sensor

A/T Fluid Temperature Sensor

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch "OFF".
  2. Disconnect terminal cord assembly harness connector.
  3. Check resistance between terminals 4 and 8.
    Fig 1: Fluid Temperature Sensor Temperature/Resistance Reference Table
    G00778364Courtesy of NISSAN MOTOR CO., U.S.A.
    Fig 2: Checking Resistance
    G00778365Courtesy of NISSAN MOTOR CO., U.S.A.
  4. If NG, replace the transaxle assembly. Refer to "REMOVAL AND INSTALLATION ".
scientia non olet · About Mike's Workshop Manuals