4. Check Electronic Controlled Engine Mount Power Supply Circuit

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch OFF.
Disconnect front electronic controlled engine mount harness connector and rear electronic controlled engine mount harness connector (A/T models only).

Fig 1: Check Electronic Controlled Engine Mount Power Supply Circuit
Courtesy of NISSAN MOTOR CO., U.S.A.
Check voltage between electronic controlled engine mount terminal 3 and ground with CONSULT-II or tester.
1. Voltage: Battery voltage

OK or NG

OK : GO TO 6 .
NG : GO TO 4.

Fig 2: Check voltage

Courtesy of NISSAN MOTOR CO., U.S.A.