Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 412 (Engine Control System) >> DTC P0605: ECM >> Diagnostic Procedure >> 1. Inspection Start >> With CONSULT-II

With CONSULT-II

WARNING: This page is about a different car, the 2004 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON.
  2. Select "SELF DIAG RESULTS" mode with CONSULT-II.
  3. Touch "ERASE".
  4. Perform DTC Confirmation Procedure. 

    See DTC CONFIRMATION PROCEDURE .

  5. Is the 1st trip DTC P0605 displayed again?
scientia non olet · About Mike's Workshop Manuals