Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 387 (Power Seat System) >> Automatic Drive Positioner >> Pedal Adjusting Sensor Circuit Inspection >> 1. Check Function >> Without CONSULT-II

Without CONSULT-II

WARNING: This page is about a different car, the 2004 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
  2. Check voltage between automatic drive positioner control unit connector and ground.
Fig 1: Voltage Chart
G00342330Courtesy of NISSAN MOTOR CO., U.S.A.
Fig 2: Checking Voltage
G00342331Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG 

  1. OK >> Pedal adjusting sensor circuit is OK.
  2. NG >> GO TO 2.
scientia non olet · About Mike's Workshop Manuals