Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 2374 (Engine Control System - DTCS U0101 To P0183) >> DTC P0011, P0021: IVT Control >> DTC Confirmation Procedure >> Notes

DTC Confirmation Procedure: Notes

WARNING: This page is about a different car, the 2011 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Always drive at a safe speed.
NOTE:
  • If DTC P0011 or P0021 is displayed with DTC P0075 or P0081, first perform trouble diagnosis for DTC P0075 or P0081.  Refer to P0075, P0081 IVT CONTROL SOLENOID VALVE .
  • If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next step.
  1. Turn ignition switch OFF and wait at least 10 seconds.
  2. Turn ignition switch ON.
  3. Turn ignition switch OFF and wait at least 10 seconds.

TESTING CONDITION: 

Before performing the following procedure, confirm that battery voltage is between 10V and 16V at idle. 

scientia non olet · About Mike's Workshop Manuals