Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 2373 (Engine Control System - Introduction And Circuit Diagnosis) >> Basic Inspection >> Inspection And Adjustment >> Throttle Valve Closed Position Learning >> Operation Procedure

Operation Procedure

WARNING: This page is about a different car, the 2011 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check that accelerator pedal is fully released.
  2. Turn ignition switch ON.
  3. Turn ignition switch OFF and wait at least 10 seconds.

    Check that throttle valve moves during above 10 seconds by confirming the operating sound.

scientia non olet · About Mike's Workshop Manuals