Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 2321 (Engine Control System - DTCS P0137 To P0445) >> DTC P0405, P0406 EGRT Sensor >> DTC Confirmation Procedure >> Procedure For DTC P0405 >> With CONSULT-II

With CONSULT-II

WARNING: This page is about a different car, the 2006 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Verify that "COOLAN TEMP/S" indicates less than 50°C (122°F).

    If the engine coolant temperature is above the range, cool the engine down. 

  4. Start engine and let it idle for at least 8 seconds.
  5. If 1st trip DTC is detected, go to , "DIAGNOSTIC PROCEDURE ".
    Fig 1: Consult-II DATA MONITOR Display Screen
    G04080354Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Mike's Workshop Manuals