Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 2285 (Engine Control System - DTCS P0137 Through P0443) >> DTC P0138, P0158 Ho2S2 >> DTC Confirmation Procedure >> Procedure For Malfunction A

Procedure For Malfunction A

WARNING: This page is about a different car, the 2008 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Start engine and warm it up to the normal operating temperature.
  2. Turn ignition switch OFF and wait at least 10 seconds.
  3. Turn ignition switch ON.
  4. Turn ignition switch OFF and wait at least 10 seconds.
  5. Start engine and keep the engine speed between 3, 500 and 4, 000 rpm for at least 1 minute under no load.
  6. Let engine idle for 2 minutes.
  7. Check 1st trip DTC.
  8. If 1st trip DTC is detected, go to "PROCEDURE FOR MALFUNCTION A ".
scientia non olet · About Mike's Workshop Manuals