Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 2156 (Meter, Warning Lamp & Indicator) >> DTC/Circuit Diagnosis >> Oil Pressure Switch Signal Circuit >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2011 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
  1. COMBINATION METER INPUT SIGNAL
    1. Select "METER/M&A" on CONSULT-III.
    2. Monitor "OIL W/L" of "DATA MONITOR" while operating ignition switch.

      OIL W/L 

      When ignition switch is in ON position (Engine stopped) : ON 

      When engine is running : OFF 

      Inspection End.

scientia non olet · About Mike's Workshop Manuals